- Ordered and paid by 1 p.m. (German time) — shipped today
- Specialist mail order from Hannover — advice by phone and email
- PayPal, Klarna, credit card, bank transfer
In detail
All about the B-Ware! Limelight Frolic Thermal Extractor
Please read carefully before purchasing:
This item is B-stock from customer returns.
The devices have been cleaned with isopropanol, are fully functional and complete. (Packaging may be missing or damaged)
Of course, you will receive the full warranty and we will assume the manufacturer's guarantee in accordance with the manufacturer's terms and conditions.
A note from the 157Grad team: The Limelight Frolic is not a beginner device. It uses hybrid heating with a high convection share, and it only shows what it can do with the right draw technique, temperature and airflow setting. If you are new to vaporizers, you should be willing to put in some practice.
The Limelight Frolic Thermal Extractor is a portable hybrid vaporizer for dried herbs. Its compact body of about 4.1 × 2.5 × 1.0 in (10.5 × 6.3 × 2.4 cm) holds an insulated PEEK air path, a cooling module with more than 200 mm of air path, continuously adjustable airflow and a swappable 21700 battery. You can use it in session or on-demand mode, and it fits all Mighty-style dosing capsules.
Hybrid heating with a high convection share
The Frolic combines conduction and convection: the large heater warms the chamber, but most of the heat comes from the hot air that flows through the herbs as you draw. Because the heater stores a lot of heat, the temperature barely drops during a draw, and your results stay consistent.
According to the manual, the first draw is a little weaker and the full vapor comes from the second draw on. Long, steady draws work best. Our guide conduction and convection explains how the two heating methods differ.
Session mode and on-demand mode
In session mode you set 40 to 220 °C (104 to 428 °F) and a session length of 100 to 500 seconds. The heater stays on until the time is up or you press the button again. In on-demand mode the Frolic only heats while you hold the button, with a range of 40 to 240 °C (104 to 464 °F).
According to the manual, the first heat-up takes about 5 seconds, and in on-demand mode each one after that takes less than 2 seconds. While heating, the display and LED glow orange; once the temperature is reached, they turn green and the Frolic vibrates. It remembers your temperature and time until the next use.
According to the manufacturer, vapor above 210 °C (410 °F) may be too harsh for some users. Our guide vaporizer temperatures explains which temperature leads to which result.
Airflow from 0 to 25 liters per minute
The ring below the mouthpiece adjusts the airflow continuously between 0 and 25 liters per minute: clockwise for a tighter draw, counterclockwise for a freer one. That way you can set the draw exactly the way you like it. A tip from the manual: with the airflow closed, the smell stays inside the device.
PEEK air path and long cooling module

The air path is fully insulated and made of CNC-milled PEEK. This high-performance plastic is taste-neutral, handles heat well and does not break like glass. The air never comes into contact with the electronics. In the cooling module, the vapor travels more than 200 mm and arrives at the mouthpiece at a pleasant temperature.
For the body, Limelight uses stainless steel and anodized 6000-series aluminum.
Chamber and Mighty-style dosing capsules
The chamber holds about 0.25 g. To fill it, pull the cooling module up, fill ground herbs up to the rim of the black oven and press them down lightly. To empty it, use the small tool that is stored right in the device.
Dosing capsules make it even easier: the Frolic fits all Mighty-style capsules, for example the titanium dosing capsule from Vapotools by 157Grad. That way you can prepare several portions and swap them in seconds on the go.
Swappable battery and USB-C charging
The Frolic runs on a swappable 21700 battery and comes with a Molicel P50B with 5,000 mAh installed. It lasts for up to 15 sessions. According to the manual, a replacement battery should deliver a continuous current of more than 25 A. You open the battery cap at the top of the device with the base of the mouthpiece.
It charges via USB-C at 5 V and 2 A. For safety, the Frolic turns off as soon as a USB-C cable is plugged in. Before the first use, remove the shipping sticker from the battery's negative pole.
Cleaning and care
According to the manual, clean the oven once it looks dirty: preheat it to 60 °C (140 °F) and wipe it with a cotton swab dipped in alcohol. The cooling module comes apart. Soak the parts in warm water or alcohol, or put them in an ultrasonic cleaner or the dishwasher, except for the aluminum lock wheel and the O-rings.
The fine screen goes in the oven, the coarse one in the cooling module. If the oven screen clogs, replace it. You will find more tips in our guide cleaning your vaporizer.
Who is the Limelight Frolic for?
The Frolic is for you if you already have experience with vaporizers and are looking for the next step: more control over temperature, session length and airflow, and a vapor path made of PEEK instead of glass. As a beginner, you will get along with it if you are willing to learn the draw technique and the settings.
You will find more from Limelight under Limelight and more devices under portable vaporizers.
Limelight Frolic specifications
| Heating | Hybrid of conduction and convection, high convection share |
| Temperature | Session mode 40–220 °C (104–428 °F), on-demand mode 40–240 °C (104–464 °F) |
| Session length | Adjustable from 100 to 500 seconds |
| Heat-up time | About 5 seconds, then under 2 seconds in on-demand mode |
| Airflow | Continuously adjustable, 0–25 l/min |
| Chamber | About 0.25 g, fits Mighty-style dosing capsules |
| Air path | Insulated, CNC-milled PEEK, cooling module with more than 200 mm |
| Battery | 21700, swappable, Molicel P50B 5,000 mAh, up to 15 sessions |
| Charging | USB-C, 5 V / 2 A |
| Display | Color display, LED and vibration |
| Dimensions | About 4.1 × 2.5 × 1.0 in (10.5 × 6.3 × 2.4 cm) |
| Weight | About 8.6 oz (245 g) with battery |
Included:
- 1× Limelight Frolic Thermal Extractor with installed battery (Molicel P50B, 21700)
- 1× USB-C charging cable
- 1× Cleaning brush
- 1× O-ring set with tool
- 3× Coarse screen for the cooling module
- 3× Fine screen for the oven
- 1× Emptying tool (stored in the device)
- 1× User manual
WEEE Reg. No. DE 47152642













